3M™ Scotch-Brite™ EX2 Deburring Wheel, 203 x 50.8 x 76.2 8S FIN

3M™ Scotch-Brite™ EX2 Deburring Wheel, 203 x 50.8 x 76.2 8S FIN is available for purchase in increments of 2

Regular Price: €257.33

Special Price €136.39

Availability: In stock

3M™ Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This deburring wheel performs best when consistently presented with a sharp edge or metal burrs.


The high performance combination of mineral (aggressiveness) and density (hardness) make the Scotch-Brite™ EX2 wheel uniquely suited to applications where a moderate degree of conformability, wheel hardness, and edge retention are needed. A unique resin system helps minimize smearing and reduces heat build-up.The EX2 Deburring Wheel runs cool and resists loading due to its open-web construction. 3M™ did this to reduce the risk of part discoloration and warping, while extending the life of the wheel.


Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. 3M™ chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.


Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites.


Tough, layered, unitized construction can operate clockwise or counterclockwise directions.


Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications.


Resists smearing for cleaner surfaces and less preparation.


Minimizes heat build up to lessen impact on heat-sensitive materials.

Put your Static Block here.

Product Description

3M™ Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This deburring wheel performs best when consistently presented with a sharp edge or metal burrs.

The high performance combination of mineral (aggressiveness) and density (hardness) make the Scotch-Brite™ EX2 wheel uniquely suited to applications where a moderate degree of conformability, wheel hardness, and edge retention are needed. A unique resin system helps minimize smearing and reduces heat build-up.The EX2 Deburring Wheel runs cool and resists loading due to its open-web construction. 3M™ did this to reduce the risk of part discoloration and warping, while extending the life of the wheel.

Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. 3M™ chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites.

Tough, layered, unitized construction can operate clockwise or counterclockwise directions.

Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications.

Resists smearing for cleaner surfaces and less preparation.

Minimizes heat build up to lessen impact on heat-sensitive materials.