Adhesives

8 Item(s)

  • 3M™ Spray 90 Adhesive, 500 ml

    3M™ Hi-Strength 90 Spray Adhesive is a fast-drying, transparent spray adhesive that bonds on concrete, wood, MDF, laminates, polyethylene and more. Its extremely strong bond gives you fast results to keep projects moving forward. This industrial grade formula is easy to dispense and apply directly to surfaces and materials and provides the added benefit of high heat and moisture resistance.

    Benefits

    Finger-touch, targeted control ensures minimal overspray, waste, and cleanup.

    Extreme high-strength and fast-tack adhesive provides strong permanent bond.

    Ideal adhesive for decorative laminates, particleboard, and many other materials, even polyethylene, polypropylene, and SBR rubber.

    1 minute dry time for fast, extremely strong permanent results and high productivity.

    Safe formula is CARB compliant and eligible for LEED credits.

    Allows for a bond time of 15 seconds to 30 minutes.

    Description

    Fast-Acting, Long Lasting. 3M™ Hi-Strength 90 Spray Adhesive is a long-time member of 3M’s portfolio of go-to, everyday-use adhesives considered by many to be necessary at the factory. Recognized worldwide, this spray adhesive has demonstrated its reliability in countless applications. For many, “getting the job done” is just a spray away. This spray adhesive has a very aggressive tack that offers a high initial grab as well as sufficient open time to position materials properly. High-solids content supports its low soak-in property, which ensures that you have time before things are stuck in place. This attribute also provides higher coverage than competing spray adhesives and helps create soft, non-dimpling glue lines. The combination of fast tack, maximum-strength bond and clean appearance make it ideal for projects of all kinds.

    Recommended Applications

    General maintenance and repair projects.

    Attaching fiberglass insulation and drywall corner beads.

    Bonding thin films, foils and fabrics.

    Picture framing and mounting displays Ideal for crafts and hobbies Installing acoustic panel.

    €15.13
    Quick View
  • 3M™ Spray 77 Multi-Purpose Adhesive, 500 ml

    3M™ Spray 77 Multi-purpose Spray Adhesive is an extremely versatile, fast-drying, and transparent spray adhesive that bonds a wide range of lightweight materials. The fast, permanent bond provides fast results to keep projects moving ahead. The spray formula is easy to dispense and apply directly onto surfaces and materials where needed.

    Benefits

    Versatile adhesive bonds a wide range of lightweight materials

    Fast, aggressive tack and low soak-in eliminates clamping and dry time

    Extended bond time allows 15 seconds to 30 minutes after application before attaching surfaces

    Forms strong bonds with paper, cardboard, fabric, cushion foam, plastic, metal, wood and more

    Allows for a bond time of 15 seconds to 30 minutes

    Repositionable while providing long-lasting strength

    Description

    The Glue that Holds the World Together For more than 50 years, 3M™ Spray 77 Multi-purpose Spray Adhesive has remained a staple in 3M’s portfolio of go-to, everyday-use adhesives considered by many to be necessary at the factory. Recognized worldwide, this spray adhesive has demonstrated its reliability in countless applications. For many, “getting the job done” is just a spray away. 3M™ Spray 77 Multi-purpose Spray Adhesive has an aggressive tack that offers a high initial grab as well as sufficient open time to position materials properly. High-solids content supports its low soak-in property, giving you time to find the best fit for your parts. This attribute also provides higher coverage than competing spray adhesives and helps create soft, non-dimpling glue lines. The combination of fast tack, strong bond and clean appearance make it ideal for projects of all kinds.

    Recommended Applications

    General maintenance and repair projects

    Attaching fiberglass insulation and drywall corner beads

    Bonding thin films, foils and fabrics

    Picture framing and mounting displays

    Ideal for crafts and hobbies

    Installing acoustic panels in home studios

    €14.26
    Quick View
  • 3M™ Spray 74 Adhesive, 500 ml

    3M™ Spray 74 Adhesive (Foam Fast) is an extremely fast tacking industrial grade spray adhesive for bonding foam and fabric.

    Benefits

    Soft bond lines.

    Aggressive tack.

    Foam tearing strength.

    Offers a fast, aggressive tack for a quick assembly of high-stress bonds.

    Allows for a bond time of 15 seconds to 30 minutes.

    Description

    Fast-Acting, Long Lasting 3M™ Spray 74 Adhesive is a long-time member of 3M's portfolio of go-to, everyday-use adhesives considered by many to be necessary at the factory. For many, "getting the job done" is just a spray away. The 3M™ Spray 74 Adhesive has an aggressive tack that offers a high initial grab with foam-tearing strength, yet allows sufficient open time to position materials properly. High-solids content supports its low soak-in property, giving you time to position parts for best fit. This attribute also provides higher coverage than competing spray adhesives and helps create soft, non-dimpling glue lines. The lace-spray pattern of its non-yellowing adhesive, combined with its fast tack, strong bond and clean appearance, make it ideal for projects of all kinds. 3M™ Spray 74 Adhesive is also offered in low-VOC aerosols, as well as non-flammable cylinders and bulk.

    Recommended Applications

    General upholstery.

    Foam lamination.

    Attaching foam and fabric to wood and other substrates.

    Ideal for crafts and hobbies.

    Installing acoustic panels.

    €12.71
    Quick View
  • 3M™ Industrial Spray Cleaner, 500 ml

    3M™ Citrus Base Cleaner is a remarkable liquid cleaner/degreaser used to help dissolve and remove dirt, grease, tar, and many non-curing type adhesives. It cleans without streaking and has a fresh citrus scent. You can use it in some cases to degrease substrates prior to adhesive bonding, in place of many chlorinated or petroleum based solvents and help increase bonding success.

    Benefits

    Contains no chlorinated or petroleum based solvents.

    Cleans gently and leaves a pleasant citrus scent.

    Fresh citrus scent helps maintain a satisfactory work environment.

    Removes grease, oil, ink and most adhesives without harsh chemicals or hours of soaking.

    Can help prepare surfaces for adhesive bonding.

    Description

    3M™ Citrus Base Cleaners help soften and loosen grease, oil and grime. They are a citrus oil based cleaner that emulsifies when flushed with water and it contain no petroleum distillates. You can use these highly effective cleaners to clean and degrease metal parts, motors, tools, printing presses, concrete, or almost any dirty or greasy surface. After using this heavy-duty degreaser/cleaner, just wipe away with a shop towel.

    €25.89
    Quick View
  • 3M™ Universal Contact Adhesive 10, 1 Liter

    3M™ Neoprene Contact Adhesive 10 is a brushable, light yellow coloured contact adhesive.

    Benefits

    Similar in performance to 3M™ Neoprene Contact Adhesive 5.

    Brushable and rollable with higher coverage.

    Meets requirements of MMM-A-121, MMM-A-130B, and A-A-1936A.

    Excellent moisture and heat resistance and will perform up to up to 300°F/148°C.

    Description

    A Versatile Rubber and Gasket Adhesive, the 3M™ Neoprene Contact Adhesive 10 has been one of the most versatile solvent based adhesives for heavy duty surface laminations for 60-plus years. It provides excellent heat and water resistance, performing in temperatures up to 300°F/148°C. 3M™ Neoprene Contact Adhesive 10 dries quickly while allowing time for positioning and adjustments without slowing down work processes.

    Recommended Applications

    Metal honeycomb composite panels

    Durable stainless steel to wood panels

    Woodworking

    Applying Your Adhesive

    Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.

    €16.23
    Quick View
  • 3M™ Rubber Adhesive 847, 1 Liter

    3M™ Nitrile High Performance Rubber And Gasket Adhesive 847 is a premium quality, multi-purpose adhesive that develops strong flexible bonds.

    Benefits

    Fuel and oil resistance

    Curable with heat Meets MMM-A-121

    Bonds leather, nitrile rubber, gasketing materials to a variety of substrates

    Optional heat cure increases bond strength

    Description

    A Versatile Rubber and Gasket Adhesive 3M™ Nitrile High Performance Rubber and Gasket Adhesive 847 is one of the most versatile solvent-based adhesives for rubber and gaskets. This adhesive bonds neoprene, reclaimed, nitrile rubber (BUNA), SBR and butyl rubbers to metal, wood and numerous plastics. It provides excellent heat and water resistance, performing in temperatures up to 300°F/148°C. 3M™ Nitrile High Performance Rubber and Gasket Adhesive 847 dries quickly and offers an open bonding range of up to 15 minutes, allowing time for positioning and adjustments without slowing down work processes.

    Recommended Applications

    Gasket bonding

    Bonding fuel lines, fuel tanks and panels exposed to oil

    Attaching rubber to various substrates (should not be applied to EPDM or TPO)

    Patching rubber

    Leather repair

    A High Performance Adhesive for Harsh Environments

    In extreme conditions, where other adhesives are likely to fail, 3M™ Nitrile High Performance Rubber and Gasket Adhesive 847 has proven to be the go-to adhesive solution. This adhesive’s capability to form strong, flexible bonds quickly make it an optimal choice in harsh environments. Additionally, its medium viscosity allows for easy handling in brush or flow applications. As always, 3M continually strives to provide the greatest solutions for the continual refinement of projects in the workplace.

    Applying Your Adhesive

    Whether it is being sprayed, brushed or rolled on, the application of your 3M adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.

    €22.22
    Quick View
  • 3M™ Fuel Resistant Adhesive 776, 1 Liter

    3M™ Fuel Resistant Adhesive 776 will bond most synthetic rubbers and plastics, especially where fuel and oil resistance is required, used for laminating fiber mats to foil in gasket manufacture, suitable for bonding friction materials to cast iron or steel housings.

    Benefits

    776 Fuel Resistant Coating has excellent resistance to fuels, oil, aromatic and aliphatic hydrocarbons.

    The product can also be used as a high strength adhesive where the above properties are needed.

    The cured film has exceptional flexibility over a wide temperature range.

    Description

    Resists oil, gasoline, and aromatic fuels (non-resistant to fuels containing alcohol).

    €45.06
    Quick View
  • 3M™ Vinyl Adhesive 1099, 1 Liter

    3M™ Nitrile High Performance Plastic Adhesive 1099 is a fast drying and heat curable plastic adhesive.

    Benefits

    Fast drying and heat curable.

    Resists weathering, water, oil, plasticizer migration, and alphalitic fuels.

    Meets MMM-A-189C, Class 2.

    Optional heat cure increases bond strength.

    Sprayable with industrial grade spray equipment.

    Description

    Ideal for Vinyl & Plastic the 3M™ Nitrile High Performance Plastic Adhesive 1099 bonds to a variety of substrates – primarily leather and most vinyl sheeting as used in awnings, upholstery and faux leather – as well as plastics, for a strong, enduring bond. However, it may stain thin or light-colored vinyls.

    Recommended Applications.

    Bonding most vinyls and plastics (not recommended for polyolefin plastic bonding).

    Aftermarket automotive repair, including panel installation and upholstery.

    Banners and awnings.

    General industrial.

    MRO.

    Speed Up the Bonding Process

    With 3M™ Nitrile High Performance Plastic Adhesive 1099 you can quickly meet the requirements of your bonding application. This fast drying adhesive forms a durable bond at room temperature, but also has optional heat-initiated chemical reaction to achieve even higher bond properties. Additionally, this adhesive is sprayable with industrial grade spray equipment, bringing convenience and consistency to large scale applications.

    Applying Your Adhesive

    Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.

    €21.78
    Quick View
×

 

Price:
Actual Price:
Our price is lower than the manufacturer's "minimum advertised price." As a result, we cannot show you the price in catalog or the product page.

You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.
Our price is lower than the manufacturer's "minimum advertised price." As a result, we cannot show you the price in catalog or the product page.

You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.